Відео

The dorman instructions say to install the wave washer last

my local mechanic quoted a $250 fee for this very service on my 2003 S claiming the process required a separate pumping device to replenish the fluid and is less than a simple old-school fluid drain. This seemed less than practicable. I balked and am glad I did.

surely that Screwdriver has to be a 'JIS' Japanese Industry Standard one NOT the 'Phillips' as the screw heads are different

Man this video is awesome. I was able to take mines out but the inside of the brass insert is worn out any idea where I can find these brass inserts?

You don’t have to remove glove box.

I bought my 2002 around 10 years ago now.. It didn't have a bed and It had 170k miles just like this one.. and I only paid 7500 for it. Best investment I've ever made.. Such a great truck

Great vid got me thru mine in 2024!

Finally someone on here that is very informative!! Thank you so much for the details.

Great video 🎉🎉

E36 over e46. I have a question. Name the easiest carz to 'work on' for dummys.

I'm having this exact problem with this exact year make and model. Thank you. I'll lyk how i do

Great video! - In the video I just saw that there is storage under the steering wheel too! I just got the car and it didn't take me more than a week to get driven nuts by this broken door brake!

Tolong saya ganti kampas dan saya membuka motornya dari kalipernya sebelum mengepres lalu setelah pemasangan DTC EPB nya nyala terus sebelah kiri apa yang salah dan bagaimana memperbaiki nya agar mode service tidak menyala terus

Thanks a lot. Home made from Arg

Very useful video !

Thank you so much for making this video, it save me a major headache today,didn’t realize the clips are different on a front wheel drive vs the all wheel drive.

Great info and explained it in simpler terms!

What tool use in the conectors?? From chile, good job!!

Howd you clean out the reservoir? Just hot water?

Thanks for the "beeper" call out.

On my 2012 f150 with the key on truck not running it click click clicks. When truck is running driving it does the same thing but will not blow cold air out just hot air

Is that the correct orintation of the resistor for the install? Myn is also stuck (locked in Maybe) sorta diagnal with the plug side closer to the driver. Just thought id check with you? :) thanks again.

Bravo!!! very well explained im going to do mine in a week wish me luck

Thank you! Very helpful

Ughh I guess this what I get for going cheap😂😂

Exactly what I'm doing now. Great helpful Video

I've seen similar videos and everyone does the same thing to reset the oil service warning but when I reset mine it won't reset and turn green. I'm at my wits end

Great video! My 2011 Raptor on AC blows cold air to the passenger side but just warm air on the drivers side. Do you think its this part thats causing that? Thanks much!

If the fan is not working will cause the power steering not to work when it gets hot

How much fluid did the transmission take after being fully drained ?

Info on air flow direction??

should remove the wheel speed sensor and brake line bracket too before dropping the LCA

Не подскажите еще- не горят лампочки в приборной панели? Куда посмотреть?

Как быть? У меня магнитола пишет Off. И ни чего не могу сделать. Россия

Aahh.. the ol'brake light leak. NICE job!

Fellow Alaskan here on the peninsula! Thanks brother! Great video I appreciate you not doing all the other steps including the cooling system I knew it could be done without that. Thanks again!

nice work adding the part number and torque specs.👍

I am changing out my caliper on my rear passenger side. The new caliper comes with new bolts, do i need to install the old Vibration dampener, or can i replace it with just a regular bolt?

Having been an over the road truck mechanic for over twenty five years I have seen many things that i didn't approve of but this is one excellent video. My compliments to the fellow who made it. Also his suggestion that a little prayer helps and I have been guilty of using a little prayer many times, especially when doing something difficult for the first time!

Lol think you'll get another 10k miles out of it.

Kuga dm2 not same 2019...and cannot get the arm off seized on as usual with these steel nut to alloy housing...🤬

Gracias ☺️

... Small tip. Disconnecting the pipe fittings in this way can lead to breakage of the fittings themselves. You need to lower the rubber ring, so as to reveal the clip underneath. Then, with the index finger and thumb of one hand, press on the clip: with the other hand, press DOWN on the fitting. Incredible to say, and against logic, but, by doing so, the fittings come off effortlessly and without problems. Volvo V70 TDI 1997. The float is the same, only without the integrated electric pump.

I have a similar problem, my fan ran at high speed once and then nothing worked anymore, I hope it's just that and not the motor, I ordered everything, I can also swap the motor😁😁

I have a question that I might have missed .My question is .The brake pads that are installed on the brake bracket .Does it matter what side of the brake bracket they are installed on .Meaning ,is their such a thing as left pad and right side pad only or does it matter .

Do you know if this would work for a 2011 Expedition?

Thanks, worked great

Got exactly the same problem... just ordered the part now. Will try to fix it myselfe. Thanks for the video.

There is no code to take off for this year ?

Thank you it’s a very Toral and accurate video I ever seen and other other results. I was able to do it myself and save myself lots of money thank you my brother.